Mikes Nursery and Grower Supplies
199 East Fairmount Ave. 
Lakewood, NY  14750


Your Subtitle text

Open Seven Days A Week


Monday thru Friday: 9AM- 7PM
Saturday: 9AM- 6PM
Sunday : 9AM- 5PM


Welcome to the  Mike's Nursery official WebSite!
We specialize in the hard to find indoor and outdoor gardening
 products and hydroponics supplies. Mikes Nursery is Chautauqua County's 

$7.99 a bag

$6.99 a bag

$7.99 a bag

$9.99 a bag


First and Largest
 supplier of Hydroponic Growing Supplies

RAW Products

NITROGEN Foliar feed Yes
PHOSPHORUS Foliar feed No
POTASSIUM Foliar feed No(organic)
KELP Foliar feed Yes(no more then once a week!!)
HUMIC ACID  Foliar feed No
SILICA Foliar feed No
YUCCA Foliar feed Yes
B-VITAMINS  Foliar feed No
CANE MOLASSES Foliar feed No
Full UP Foliar feed Yes
GROW  Foliar feed No
BLOOM  Foliar feed No


Jungle Green

    Jungle Green

     17-15-17       Price $16.99  


  Use this one part in your Veg Cycle until you are ready to kick into your bloom cycle.    Jungle Green has the added advantage that it dissolves easily in cold water. Use
  on House plants with no other fertilizers needed. This applies to non-fruiting plants. Ÿ    Perfect vegetable growth fertilizer to get the size and fruit set you desire. If you
  are growing a non fruiting plant this is the only fertilizer you will need.

Better Bloom

       Better Bloom

        12-34-12       Price $16.99


 Specifically designed for the first three weeks of your Bloom Cycle.
Excellent for  flowers, tomatoes, tropical plants and any others that require higher levels of  phosphorus. This product really makes fruit swell in size. Extremely concentrated
 with no fillers added.

Yield Up

           Yield Up

          9-47-9         Price $16.99


   Increase your yield! Use Yield Up alone in the last three weeks of your bloom cycle for    a high phosphorus boost. Excellent for indoor or outdoor gardens. Specifically
designed for plants that grow longer than 3 months. Greenhouse quality for home or commercial use.


             Cal - Pow

              10-0-0        Price $16.99


       Calcium and Magnesium Booster! Ÿ


   Cal- Pow is not a stand alone fertilizer. Specifically designed to compliment performance when used in combination with: Jungle Green Better Bloom Yield Up ŸCal-Pow is an excellent additive to prevent blossom end rot on tomatoes. ŸCal-Pow can also be used as a nutrient additive or foliar spray. ŸCal-Pow enhances our dry pack fertilizers performance.


      Diagnosing Calcium Deficiencies



        Magnesium Deficiencies

        Calcium is an immobile element.  In other words, once it is locked up in the plant tissue,
     it can’t be translocated to other parts of the plant.  So a calcium deficiency normally shows
    up in the new growth at the growing tips of the plant, causing deformed leaves and reduced
    root growth.  There may be plenty of calcium in the nutrient formula, but anything that
     interrupts the flow of water in the plant could cause a calcium deficiency.  For example, if
    relative humidity is too high, the plant may not transpire enough water to transport calcium
     to all of the cells of the plant.  As a result, calcium deficiency may show up as tip burn in
     lettuce or blossom end rot in tomatoes.  High temperatures, stagnant air and over fertilizing
       can make the calcium deficiency even worse.  So before reaching for a bottle of            calcium/magnesium supplements, make sure that your environment is under
     control, first.

Magnesium, on the other hand, is a mobile element.  In other words, if there is a magnesium deficiency the plants will strip magnesium out of the lower leaves and transport it to the new growth where it is needed the most.  So magnesium deficiency shows up first as interveinal  chlorosis on the older, bottom leaves.  Magnesium is the central element in chlorophyll, the green pigment in plant leaves.  So if there is a magnesium deficiency, the veins of the lower    leaves will stay green, but the tissue between the veins will turn yellow.  Magnesium
 deficiencies are fairly common in indoor gardens.  Indoor gardeners often use powerful HID grow lamps such as metal halide or high pressure sodium.  As the light becomes more intense, the plants need more magnesium to efficiently utilize the light energy. That’s why the
symptoms of magnesium deficiency are often more obvious in gardens that have more intense light, and magnesium supplements are sometimes required.

    Cal/mag supplements are commonly prescribed to treat calcium and magnesium deficiencies.       Since magnesium is so biologically active, calcium is often used as a buffer.  The calcium slows       down the uptake of magnesium so that excessive magnesium doesn’t accumulate in the
    leaves and become toxic to the plant.  For best results, most cal/mag formulas will provide      calcium and magnesium in about a 5:1 ratio.  The calcium and magnesium compete with
    one another for uptake by the plant roots, helping to provide balanced uptake.

   Not all calcium/magnesium supplements are alike!  So make sure you carefully read the labels       to find out what sources the calcium and magnesium are derived from.  Calcium
    and magnesium supplements may be derived from carbonates, nitrates or sulfates.

                        Magnesium Supplements

If you want a quick fix for a magnesium deficiency, without any extra nitrates or bicarbonates, the     best solution may be to use a magnesium sulfate supplement without the calcium. 
      Magnesium sulfate is fast acting, highly soluble, and may be used safely at the roots or as a           foliar spray.  Since it contains no nitrates, magnesium sulfate is an excellent choice during           flowering.  In fact, many “sweet” products designed specifically for flowering are loaded with             magnesium sulfate.  The magnesium helps keep the sugars flowing all the way to the
     day of harvest, and the sulfates are an added bonus.  Sulfate compounds actually help
    turn on flowering genes in the plant, contribute to aromas, and hasten the ripening process.

General pH Information

      What is pH?

A pH (potential of Hydrogen) measurement reveals if a solution is acidic or alkaline
(also base or basic). If the solution has an equal amount of acidic and alkaline        molecules,
 the pH is considered neutral. Very soft water is commonly acidic, while very hard water
 is commonly alkaline, though unusual circumstances can result in exceptions.
The pH scale is logarithmic and runs from 0.0 to 14.0 with 7.0 being neutral.
Readings less than 7.0 indicate acidic solutions, while higher readings indicate alkaline or
 base solutions. Some extreme substances can score lower than 0 or greater than 14,
but most fall within the scale.

          What is automatic temperature compensation (ATC)?

When measuring pH using a pH electrode the temperature error from the electrode
varies based on the Nernst Equation as 0.03pH/10C/unit of pH away from pH7. The error
due to temperature is a function of both temperature and the pH being measured.
 Temperature compensation can be achieved manually or automatically. Manual
temperature compensation is usually achieved by entering the temperature of the fluid
being measured into the instruments menu and then the instrument will display a
 "Temperature Compensated" pH reading. Automatic temperature compensation requires
 input from a temperature sensor and constantly sends a compensated pH signal to the
display. Automatic temperature compensation is useful for measuring pH in systems with
 wide variations in temperature. 


           What is EC?

      Electrical Conductivity (EC) is defined by the ability of a solution to conduct an
    electrical current.

          What is TDS?

     Total Dissolved Solids (TDS) is defined as the amount of solids dissolved in a solution.


           What is their relationship?

      The relationship between the amounts of solids such as salts found in fertilizers is directly        proportional to their conductivity, therefore, the higher the amount of solids the greater
the conductivity. This is because when fertilizers are dissolved into water they become "ions", which means that they become positively or negatively charged and can therefore conduct a    current.

              How does an EC/TDS meter work?

       Two electrodes with an applied AC voltage are placed in the solution. This creates a current    dependent upon the conductive nature of the solution. The meter reads this current and displays in either conductivity (EC) or ppm (TDS).

              Conversion Factors

      TDS meters read the conductivity; the meter automatically converts this value to TDS which is typically displayed in ppm.


We are repairing ballast for lights.

Look for coupons in the PENNY SAVER, Dunkirk Observer and Post Journal last week of every month !!!!
But, We prefer you print off our website coupons.
Makes Mike feel more at home knowing that our customers
are enjoying our hard work.

We appreciate our customers every day.


2014/2015 Catalog

the competition. -
See more at:

Meet Toxicity Characteristic Leaching Procedure (TCLP) test criteria as non-hazardous waste.
- See more at:

Prices are subjected to change without notice. This could be for a number of reasons.
Website Builder